Aoocci BM5.5 User Manual

(Motorcycle Streaming Media Device)

Specification	Details
Main Chip (Processor)	SSC8836Q Dual-Core A53
Screen	5.5 inch
Screen pixel	1440x720
DDR Memory (RAM)	Built-in 2GB DDR3
Flash Memory	1GB NAND Flash
Cameras	Sony IMX307, AHD 1080P (Front & Rear)
Cameras Field Angle	140° wide angle
Screen Brightness	1000 nits, auto-brightness adjustment
Temperature Range	Operates from -20°C to 70°C (-4°F to 158°F)
Water/Dust Resistance	IP67 certified
Storage Support	TF cards up to 128GB
Wireless Features	Wireless CarPlay & Android Auto
Bluetooth	Support
Recording Features	G-sensor, emergency recording, loop recording
Anti-Shake	Intelligent anti-shake technology
Auto-Connection	Auto-connects to bike, starts recording automatically
Plug-and-Play	No complex wiring needed, safe and easy setup

Preamble

Dear users:

Thank you for choosing this product. In order to have a good using

experience, please kindly read this manual carefully.

Before using this device, please read carefully and understand the below:

Please do not use or watch this device while driving to avoid accident.
Please do not install or repair this device by yourselves.
Unprofessional behaviors may cause danger or motorcycle electrical systems damage.

Please make sure that the device is installed by professional electronic technician:

For proper installation, please use the standard components and install with the specified method.
Before installing this device, a temporary trial installation test is necessary. Please contact the seller if there are any abnormalities.
Please confirm whether the other devices of the vehicle connect correctly after completing the installation.
Please do not randomly power on the vehicle's wiring to avoid damaging the computer and important components.
To avoid the vehicle system short circuits, we suggest that remove the negative terminal wire of the battery before installation. Do not start the vehicle and then install with power on mode.

This product is suitable for BMW motorcycle mounts.
Align the machine with the bracket, paying attention to the direction shown in the diagram.
Press the machine into the bracket
After the machine is installed, the vehicle can be started and used.
After the machine is installed, pressing the left button can lock the machine.
Pressing the right button can remove the button.

Click the CarPlay icon on the main interface.
Open the Bluetooth settings of your iphone and find the model corresponding to the machine to connect to.
Connect Bluetooth and click pairing, make sure the phone WiFi is turned on.
After the connection is successful, the machine displays the CarPlay interface, indicating that the connection is successful.
Click Home to launch CarPlay and return to the main interface of the machine.

Ensure Car play or Android Auto connect successful.
Long press "MENU 个"(Figure 1) 2 seconds to wake up. Knob control function(It will automatically exit if there is no operation in 15 seconds.
Short press "MENU 1" (Figure 1) to switch modes.
In the recorder preview interface, short press the knob left button (Figure 5) to preview front and back, and short press the knob right button (Figure 6) to take a photo.
Call comes in, short press knob right button (Figure 6) to answer, short press knob left button (Figure 5) to hang up.
In the Car play or Android Auto interface, short press knob. Left (Figure 5), Right (Figure 6), UP (Figure 3) and Down (Figure 4) to move the cursor to select the menu. Long press knob Right (Figure 6) 1 second for "Confirm", long press knob Left (Figure 5) 1 second for back to Previous.

1. Find the ABS sensor in the picture, located below the second seat
2. Unplug the ABS sensor harness and connect it to the adapter wire
3. Connect the CAN box to the wiring harness on the adapter line and secure it in place