This is a CarPlay Smart Box suitable for NTG4.5 head unit.
It is currently compatible with the following models:
✅ Mercedes-Benz A B C E G GL ML GLA GLK SLK (NTG4.5/4.7) 2011-2015 - (CSBME-2)
✅ A Class (2012-2014, Head Unit: NTG4.5/4.7, W176) - (CSBME-2)
✅ B Class (2011-2014, Head Unit: NTG4.5/4.7, W246) - (CSBME-2)
✅ C Class (2011-2014, Head Unit: NTG4.5/4.7, W204) - (CSBME-2)
✅ CLA Class (2012-2014, Head Unit: NTG4.5/4.7) - (CSBME-2)
✅ E Class (2011-2014, Head Unit: NTG4.5/4.7, C207) - (CSBME-2)
✅ G Class (2012-2014, Head Unit: NTG4.5/4.7, G463) - (CSBME-2)
✅ GL Class (2012-2014, Head Unit: NTG4.5/4.7, X166) - (CSBME-2)
✅ GLA Class (2013-2015, Head Unit: NTG4.5/4.7, X156) - (CSBME-2)
✅ GLK Class (2011-2014, Head Unit: NTG4.5/4.7, X204) - (CSBME-2)
✅ ML Class (2011-2014, Head Unit: NTG4.5/4.7, W166) - (CSBME-2)
✅ SLK Class (2012-2014, Head Unit: NTG4.5/4.7, R170) - (CSBME-2)
✅ Mercedes CarPlay Smart Box 2 (CSBME-2)
And for other Mercedes Benz NTG4.5 head unit models, please contact us.
The detailed steps are as follows:
1. Take out air conditioning panel carefully.
2. Remove out NTG4.5 head unit.
3. Take out Mercedes NTG4.5 head unit for cables layout.
4. Convert 48PIN harness with original Head Unit power cable and then connect to CarPlay Box power cable.
5. Don't forget to connect AUX cable one side to AUDIO-IN from 48PIN harness, another side connect to AUDIO-OUT from power cable.
6. Return cables connect to NTG head unit.
7. LVDS IN connect to NTG head unit, LVDS OUT connect to original LVDS cable (grey one).
8. Connect power cable with CarPlay Box.
9. Install the USB port at good position.
10. Connect WiFi antenna well and locate at good position.
11. Connect microphone and install at good position.
12. Return Mercedes NTG4.5 head unit and air conditioning panel to original.
13. Finally connect all cables with CarPlay Box, locate at good position, all job done.
14. Select “AUX External”, press “BACK” switch to CarPlay.
